- 600 Nm peak torque The highest single-module rating in the Xynova rotary range, with headroom for jumps, stumble recovery and other burst events.
- 43:1 planetary reduction The high ratio trades output speed for torque and brings the no-load figure to 32 rpm.
- 17-bit encoder Fine position feedback on the largest module, supporting repeatability of 0.15° or better.
- 140 Nm/kg in a 4.3 kg module Strength is the design priority here; the mass and the Ø120 × 126 mm envelope are the trade.
- Integrated cooling channels Electromagnetic and thermal co-optimisation with a proprietary winding process is used to hold torque output under sustained load.
- 48 V DC input Shares the supply voltage of the smaller modules, so a full limb can run from one bus.
Description
The PR43-120-600-HB is the largest rotary actuator Xynova builds. Rated at 600 Nm of peak torque through a 43:1 planetary gearbox, it is aimed at the handful of joints in a full-size robot that carry the whole machine — hips, knees and the waist axis that supports the upper body through a bend or a lift.
Those loads come with a physical cost. The module measures Ø120 × 126 mm and weighs 4.3 kg, roughly three and a half times the mass of the mid-range arm joints, and the high reduction brings the no-load output down to 32 rpm. Torque density is 140 Nm/kg and position feedback comes from a 17-bit encoder, with repeatability of 0.15° or better.
Set against the other high-torque module, the PR64-110-500, this is the stronger and finer-resolved unit — 100 Nm more peak torque and 17-bit rather than 14-bit feedback. The PR64 is the lighter one by a wide margin at 1.6 kg, and it is faster at 45 rpm. Where mass at the joint drives the inertia budget, compare the two carefully before committing to this one.
600 Nm is a peak rating, not a duty figure. Rated continuous torque, current draw under load, the communication interface and the meaning of the HB suffix are confirmed with the quotation.
Key Capabilities
- 600 Nm peak torque: The highest single-module rating in the Xynova rotary range, with headroom for jumps, stumble recovery and other burst events.
- 43:1 planetary reduction: The high ratio trades output speed for torque and brings the no-load figure to 32 rpm.
- 17-bit encoder: Fine position feedback on the largest module, supporting repeatability of 0.15° or better.
- 140 Nm/kg in a 4.3 kg module: Strength is the design priority here; the mass and the Ø120 × 126 mm envelope are the trade.
- Integrated cooling channels: Electromagnetic and thermal co-optimisation with a proprietary winding process is used to hold torque output under sustained load.
- 48 V DC input: Shares the supply voltage of the smaller modules, so a full limb can run from one bus.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Type | Integrated planetary joint module |
|---|---|
| Model | PR43-120-600-HB |
| Peak torque | 600 Nm |
| No-load speed | 32 rpm |
| Gear ratio | 43:1 |
| Torque density | 140 Nm/kg |
| Weight | 4.3 kg |
| Size | Ø120 × 126 mm |
| Encoder resolution | 17-bit |
| Repeatability | ≤0.15° |
| Input voltage | 48 V DC |
| Rated continuous torque | Confirm at quote |
| Rated current | Confirm at quote |
| Communication interface | Confirm at quote |
| HB suffix definition | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
The highest-load joints in a large robot — humanoid hips and knees, waist and torso axes, heavy-payload shoulder joints and lower-limb exoskeleton research.
600 Nm of peak torque at a torque density of 140 Nm/kg, the highest single-module rating in the Xynova rotary range.
The 43:1 reduction trades speed for torque. That suits slow, heavily loaded joints, so check your gait or motion profile before specifying it for a fast axis.
This module offers 100 Nm more peak torque and a 17-bit encoder instead of 14-bit. The PR64 weighs 1.6 kg against 4.3 kg and runs faster at 45 rpm.
It is offered by quotation; configuration, quantity and delivery are agreed per project.
The body is Ø120 × 126 mm. Mounting interface drawings are provided with the quotation so you can plan the joint envelope.
Recently Viewed
You haven't viewed any products yet.
