- Five fingers, 20 joints Four fingers and a thumb with four active joints each give 20 degrees of freedom, against 16 on the V5 Plus and V5 Sense.
- Modbus over RS-485 or Ethernet Modbus RTU, Modbus TCP or a custom RS-485 protocol connect the hand straight to industrial robot and automation controllers.
- Sensing at fingertips, joints and palm Pressure sensors cover 260 to 1,260 hPa at 1 kPa accuracy, and each fingertip lights blue, green, olive or red as the grip tightens.
- Three control modes plus High-Force Mode Current control for force-sensitive work, position control at 0.088° and stiffness control for compliant holds, with High-Force Mode for a firmer grasp.
- Friction and temperature compensation Built-in algorithms correct control error from friction and temperature, so the joints behave the same as conditions change.
- Aluminium body, contoured palm Heatsinks in the upper fingers support sustained high loads, and a 3D-contoured palm widens the contact area for stable grasps.
- Monitoring on Ubuntu with ROS 2 Live motion and pressure views, a pose and sequence manager and time-series plots run on Ubuntu 22.04 or 24.04 LTS with ROS 2.
Description
The Wonik Allegro Hand V6 F is Wonik Robotics' five-finger dexterous robotic hand: four fingers and a thumb with four active joints each, 20 degrees of freedom, and pressure sensors at the fingertips, finger joints and palm. It weighs 1,150 g, carries up to 15 kg and connects to industrial controllers over Modbus on RS-485 or Ethernet.
The V6 F is built for manipulation that has to run in a robot cell as well as a lab. Instead of the CAN bus of earlier Allegro Hands, it speaks Modbus RTU, Modbus TCP or a custom RS-485 protocol, so an industrial robot or automation controller can command it directly. Three control modes run on the same hand: current control for force-sensitive work, position control at 0.088° and stiffness control for compliant or firm holds, plus a High-Force Mode for grasps that need to hold harder. Friction and temperature compensation keep joint behaviour consistent as conditions change.
The pressure sensors read 260 to 1,260 hPa with 1 kPa accuracy between 0 and 60 °C, and each fingertip lights blue, green, olive or red to show the grasp state. The aluminium body has heatsinks in the upper fingers for sustained high loads and a 3D-contoured palm that widens the contact area. Gearing is a single 288.35:1 ratio, 0.92 Nm stall and 0.23 Nm nominal torque. The monitoring tools, with live motion and pressure views, a pose and sequence manager and time-series plots of joint position, current, temperature and sensor data, run on Ubuntu 22.04 or 24.04 LTS with ROS 2.
For a four-finger hand on CAN, the Allegro Hand V5 Sense senses at the fingertips and finger joints, and the Allegro Hand V5 Plus at the fingertips only. The three-finger Allegro Hand V5 and the torque-controlled Allegro Hand V4 complete the range. Compare them with our other dexterous robotic hands.
Key Capabilities
- Five fingers, 20 joints: Four fingers and a thumb with four active joints each give 20 degrees of freedom, against 16 on the V5 Plus and V5 Sense.
- Modbus over RS-485 or Ethernet: Modbus RTU, Modbus TCP or a custom RS-485 protocol connect the hand straight to industrial robot and automation controllers.
- Sensing at fingertips, joints and palm: Pressure sensors cover 260 to 1,260 hPa at 1 kPa accuracy, and each fingertip lights blue, green, olive or red as the grip tightens.
- Three control modes plus High-Force Mode: Current control for force-sensitive work, position control at 0.088° and stiffness control for compliant holds, with High-Force Mode for a firmer grasp.
- Friction and temperature compensation: Built-in algorithms correct control error from friction and temperature, so the joints behave the same as conditions change.
- Aluminium body, contoured palm: Heatsinks in the upper fingers support sustained high loads, and a 3D-contoured palm widens the contact area for stable grasps.
- Monitoring on Ubuntu with ROS 2: Live motion and pressure views, a pose and sequence manager and time-series plots run on Ubuntu 22.04 or 24.04 LTS with ROS 2.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Wonik Robotics |
|---|---|
| Model | Allegro Hand V6 F |
| Fingers | 5 (four fingers and a thumb) |
| Degrees of freedom | 20 active (4 per digit) |
| Actuation | DC motors |
| Gear ratio | 288.35:1 |
| Stall torque | 0.92 Nm |
| Nominal torque | 0.23 Nm |
| Joint resolution | 0.088° |
| Payload | Up to 15 kg |
| Weight | 1,150 g |
| Control modes | Current, position and stiffness control, plus High-Force Mode |
| Compensation | Friction and temperature compensation |
| Tactile sensing | Pressure sensors at the fingertips, finger joints and palm |
| Pressure range | 260–1,260 hPa |
| Pressure accuracy | 1 kPa |
| Sensor operating temperature | 0–60 °C |
| Fingertip LED | Blue at or below 1,050 hPa; green 1,050–1,130 hPa; olive 1,130–1,170 hPa; red at or above 1,170 hPa |
| Communication interface | RS-485, Ethernet |
| Protocol | Modbus RTU, Modbus TCP, custom RS-485 protocol |
| Power | 24.0 V, 5.0 A, 120 W |
| Structure | Aluminium body, heatsinks built into the upper fingers, 3D-contoured palm |
| Software | Real-time monitoring, pose and sequence manager, time-series plots of joint position, motor current, temperature and sensor data; ROS 2 |
| Host requirements | Intel Core i3-8109U or better, 2 GB RAM, 2 GB storage, OpenGL 3.0 with hardware acceleration and 64 MB video RAM, Ubuntu 22.04 or 24.04 LTS |
| Hand side | Confirm at quote |
| Arm mounting adapter | Confirm at quote |
Industries
Frequently Asked Questions
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
Four fingers and a thumb with four active joints each: 20 degrees of freedom. The V5 Plus and V5 Sense have 16 and the three-finger V5 has 9.
Pressure at the fingertips, the finger joints and the palm, from 260 to 1,260 hPa with 1 kPa accuracy between 0 and 60 °C. Each fingertip LED shows the grasp state from blue through green and olive to red.
It weighs 1,150 g and carries a maximum payload of 15 kg.
Over RS-485 or Ethernet, using Modbus RTU, Modbus TCP or a custom RS-485 protocol, on a 24.0 V, 5.0 A supply. The monitoring tools run on Ubuntu 22.04 or 24.04 LTS with ROS 2; mounting to your arm is confirmed with the quotation.
The V6 F adds a fifth finger, palm sensing, position and stiffness control with High-Force Mode, and Modbus over RS-485 or Ethernet instead of CAN, at 1,150 g. The V5 Sense has three fingers and a thumb, current control over CAN at 333 Hz and weighs 1,240 g.
Wonik Allegro Hand V6 F Five-Finger Dexterous Hand
- Regular price
- Request Quote for Price
Recently Viewed
You haven't viewed any products yet.
