- 20 degrees of freedom, 16 active Four driven joints in the thumb and three in each finger, with ±22° of lateral swing across the four fingers.
- Backdrivable force-controlled joints Twelve composite-transmission and four gear-transmission joints, all micro force-controlled, can be back-driven, which Unitree designed to keep reinforcement-learning training smooth.
- Fingers replace one at a time Each of the five fingers can be swapped on its own, so a damaged finger does not take the whole hand out of service.
- Up to 4.5 kg grasp load Holding a 5 cm round object it carries 3.5 kg palm down and 4.5 kg palm facing left, with 10 N at each fingertip.
- ±1 mm fingertip repeatability The fingers close on objects down to 10 mm across and return to position within ±1 mm.
- 1,000 Hz over USB 2.0 Each joint takes position, velocity, torque, stiffness and damping commands at 1,000 Hz, from a 24–60 V supply.
Description
The Unitree Dex5-1 is Unitree's five-finger dexterous robotic hand, here in the version for the Unitree H2 humanoid. It has 20 degrees of freedom, 16 of them active, with four driven joints in the thumb and three in each finger, weighs 1,100 g and measures 217.3 × 127.5 × 72.1 mm laid flat.
It is for H2 labs that want human-like five-finger manipulation for teleoperation, imitation learning and reinforcement learning. Twelve joints use Unitree's micro force-controlled composite transmission and four use force-controlled gear transmissions, driven by hollow-cup motors with high-precision encoders. Every joint can be back-driven, which Unitree designed to end the stiff-hand problem in reinforcement-learning training, and each of the five fingers can be replaced on its own.
Fingertips push with 10 N and repeat to ±1 mm, the fingers close on objects down to 10 mm across, and the four fingers swing ±22° sideways. Holding a 5 cm round hard object the hand carries up to 3.5 kg palm down and 4.5 kg palm facing left. Each joint takes position, velocity, torque, stiffness and damping commands over USB 2.0 at 1,000 Hz, on a 24–60 V supply, and Unitree opens the hand to secondary development.
The Dex5-1P Tactile for the H2 adds 94 pressure sensors to the same hand, and the Dex5-1P left hand for the H1 and H1-2 brings the tactile build to those robots. For a lighter, fully driven alternative, see the 22-DoF Unitree Dex5-S, or compare all our dexterous robotic hands.
Key Capabilities
- 20 degrees of freedom, 16 active: Four driven joints in the thumb and three in each finger, with ±22° of lateral swing across the four fingers.
- Backdrivable force-controlled joints: Twelve composite-transmission and four gear-transmission joints, all micro force-controlled, can be back-driven, which Unitree designed to keep reinforcement-learning training smooth.
- Fingers replace one at a time: Each of the five fingers can be swapped on its own, so a damaged finger does not take the whole hand out of service.
- Up to 4.5 kg grasp load: Holding a 5 cm round object it carries 3.5 kg palm down and 4.5 kg palm facing left, with 10 N at each fingertip.
- ±1 mm fingertip repeatability: The fingers close on objects down to 10 mm across and return to position within ±1 mm.
- 1,000 Hz over USB 2.0: Each joint takes position, velocity, torque, stiffness and damping commands at 1,000 Hz, from a 24–60 V supply.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Unitree Robotics |
|---|---|
| Model | Dex5-1 |
| Compatible robot | Unitree H2 |
| Hand side | Left or right, confirmed with the order |
| Fingers | 5, each replaceable on its own |
| Degrees of freedom | 20 (16 active, 4 passive) |
| Active joints | Thumb 4; index, middle, ring and little finger 3 each |
| Transmission | 12 micro force-controlled composite transmission joints, 4 micro force-controlled gear-transmission joints |
| Motors | Hollow-cup motors with high-precision encoders; backdrivable joints |
| Thumb joint ranges | Joint 0: −33.5° to 39°; joint 1: 0–100°; joint 2: 0–110°; joint 3: 0–92° |
| Finger joint ranges | Knuckle 0: −22° to 22°; knuckle 1: 0–90°; knuckle 2: 0–95°; knuckle 3: 0–81° (coupled with joint 2) |
| Four-finger lateral swing | ±22° |
| Weight | 1,100 g |
| Size (flat) | 217.3 × 127.5 × 72.1 mm |
| Fingertip strength | 10 N |
| Fingertip repeat positioning accuracy | ±1 mm |
| Minimum grip diameter | 10 mm |
| Grasp load, palm down | Up to 3.5 kg (5 cm round hard object, room temperature) |
| Grasp load, palm facing left | Up to 4.5 kg (5 cm round hard object, room temperature) |
| Pressure sensors | None (94 on the Dex5-1P) |
| Feedback | Joint mode, position, velocity, torque and temperature; voltage and current |
| Communication interface | USB 2.0 |
| Communication rate | 1,000 Hz |
| Control commands | Joint mode, position, velocity, torque, stiffness and damping |
| Working voltage | 24–60 V |
| Current (at 58 V) | 0.2 A static, 4 A maximum |
| Working temperature | −20 to 60 °C |
| Software | Open for secondary development |
Industries
Frequently Asked Questions
The Unitree Dex5-1 Five-Finger Dexterous Hand for H2 is priced at 561 400 Kč in your market.
Twenty, 16 of them active and 4 passive: four driven joints in the thumb and three in each other finger, with ±22° of lateral swing across the four fingers.
No. The Dex5-1 reads contact through its force-controlled joints; the Dex5-1P Tactile for the H2 is the same hand with 94 pressure sensors in 12 arrays.
Holding a 5 cm round hard object it carries up to 3.5 kg palm down and 4.5 kg palm facing left. Each fingertip pushes with 10 N, and the fingers close on objects down to 10 mm across.
Each of the five fingers can be replaced on its own, so a damaged finger is swapped instead of the whole hand going back for repair.
Over USB 2.0 at 1,000 Hz on 24–60 V, drawing 0.2 A at rest and up to 4 A at 58 V. Hand side, mounting and cabling for your H2 are confirmed with the quotation.
Unitree Dex5-1 Five-Finger Dexterous Hand for H2
- Regular price
- 561 400 Kč
- Sale price
Recently Viewed
You haven't viewed any products yet.
