- Same 80-frame torque table, heavier housing The five-ratio torque and speed figures, the 750 W rating, the 27 mm bore, the housing lengths and the rotor inertias match the CRA-RI80-97's tables; base build mass is 2.06 kg against 1.5 kg.
- 217 N·m peak at the top ratio 51:1 gives 121 N·m peak at up to 65 RPM, 81:1 gives 169 N·m at 43 RPM, and 101:1, 121:1 and 161:1 give 194, 207 and 217 N·m at 36, 30 and 22 RPM.
- 133 N·m allowable at average load The three higher ratios are rated for 133 N·m at average load and 84 N·m at a 2000 RPM input speed.
- 750 W electrical platform All builds run from 24–48 V at 9 A rated and 10.4 A maximum continuous current, with a 0.143 N·m/A torque constant.
- 27 mm hollow shaft The wide bore lets power and signal cabling for the axes beyond this joint run through its centre rather than around the housing.
- Three fully specified builds 85.5 mm at 2.06 kg for the base unit, 105.5 mm at 2.26 kg for the extended -B body, and 85.5 mm at 2.05 kg for the -2E-EC.
- Fourth build confirmed at quote The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
Description
The CRA-RI80-110 is the larger-framed of the two Ti5 80-series joints. It has the same five-ratio torque table as the CRA-RI80-97 — 121 N·m peak at the 51 ratio up to 217 N·m at 161, with peak speed falling from 65 RPM to 22 RPM — in a heavier housing: 2.06 kg for the base build against 1.5 kg.
The second difference is electrical. Both modules are rated at 750 W from a 24–48 V supply with a 0.143 N·m/A torque constant, but maximum continuous current here is 10.4 A with 9 A rated, against 11.1 A and 9.6 A on the lighter frame. Everything else in the two tables agrees, including the 27 mm bore, the 85.5 mm and 105.5 mm housing lengths and the rotor inertias, so the frames are separated by mass and current headroom rather than by output. Which of the two suits a given mounting and duty cycle is confirmed with the quotation.
Three builds are fully specified. The base CRA-RI80-110-PRO-2-XXX is 85.5 mm at 2.06 kg with a 16-bit encoder on CAN and 1,477.6 g·cm² rotor inertia. The -B build extends to 105.5 mm at 2.26 kg and 1,761.1 g·cm². The -2E-EC build keeps the 85.5 mm length at 2.05 kg and adds a 16/18-bit encoder option with EtherCAT alongside CAN. The -B-2E-EC designation completes the family, and its figures are confirmed with the quotation.
Both 80-frame modules sit between the 70-frame, which stops at 108 N·m, and the 100-frame, which starts at 267 N·m, so this is the joint for a base or hip axis on a machine that does not need the largest frames. It is an integration part: the links, controller, power distribution and software are the integrator's.
Key Capabilities
- Same 80-frame torque table, heavier housing: The five-ratio torque and speed figures, the 750 W rating, the 27 mm bore, the housing lengths and the rotor inertias match the CRA-RI80-97's tables; base build mass is 2.06 kg against 1.5 kg.
- 217 N·m peak at the top ratio: 51:1 gives 121 N·m peak at up to 65 RPM, 81:1 gives 169 N·m at 43 RPM, and 101:1, 121:1 and 161:1 give 194, 207 and 217 N·m at 36, 30 and 22 RPM.
- 133 N·m allowable at average load: The three higher ratios are rated for 133 N·m at average load and 84 N·m at a 2000 RPM input speed.
- 750 W electrical platform: All builds run from 24–48 V at 9 A rated and 10.4 A maximum continuous current, with a 0.143 N·m/A torque constant.
- 27 mm hollow shaft: The wide bore lets power and signal cabling for the axes beyond this joint run through its centre rather than around the housing.
- Three fully specified builds: 85.5 mm at 2.06 kg for the base unit, 105.5 mm at 2.26 kg for the extended -B body, and 85.5 mm at 2.05 kg for the -2E-EC.
- Fourth build confirmed at quote: The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Ti5 Robotics |
|---|---|
| Model Family | CRA-RI80-110-PRO-2 |
| Product Type | Integrated rotary joint module (motor, gearing, encoder, drive) |
| Builds | -XXX (base), -XXX-B (extended body), -XXX-2E-EC (dual encoder, EtherCAT) |
| Further Build | -XXX-B-2E-EC — confirm at quote |
| Relation to the CRA-RI80-97 | Same five-ratio torque table and 750 W rating; heavier frame, lower current ceiling |
| Gear Ratios | 51:1, 81:1, 101:1, 121:1, 161:1 |
| Peak Torque | 51:1 — 121; 81:1 — 169; 101:1 — 194; 121:1 — 207; 161:1 — 217 N·m |
| Max Allowable Torque at Average Load | 51:1 — 68.5; 81:1 — 107; 101:1 — 133; 121:1 — 133; 161:1 — 133 N·m |
| Rated Torque at 2000 RPM Input | 51:1 — 48; 81:1 — 78; 101:1 — 84; 121:1 — 84; 161:1 — 84 N·m |
| Peak Speed | 51:1 — 65; 81:1 — 43; 101:1 — 36; 121:1 — 30; 161:1 — 22 RPM |
| Rated Speed at Half Rated Torque | 51:1 — 54; 81:1 — 35; 101:1 — 27; 121:1 — 23; 161:1 — 17 RPM |
| Gear Backlash | 51:1 — 20; 81:1 — 20; 101:1 — 10; 121:1 — 10; 161:1 — 10 arcsec |
| Rated Power | 750 W |
| Supply Voltage | 24–48 V |
| Rated Current | 9 A |
| Max Continuous Current | 10.4 A |
| Torque Constant | 0.143 N·m/A |
| Encoder Resolution | 16-bit (base, -B); 16/18-bit option on -2E-EC |
| Communication Bus | CAN (base, -B); CAN or EtherCAT on -2E-EC |
| Hollow Shaft | 27 mm |
| Length | 85.5 ±0.5 mm base; 105.5 ±0.5 mm -B; 85.5 ±0.5 mm -2E-EC |
| Mass | 2.06 kg base; 2.26 kg -B; 2.05 kg -2E-EC |
| Rotor Inertia | 1,477.6 g·cm² base; 1,761.1 g·cm² -B; 1,532.07 g·cm² -2E-EC |
| Ingress Protection | Confirm at quote |
| Operating Temperature | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
Mass and current. Both share the same five-ratio torque and speed table, the same 750 W rating, the same 0.143 N·m/A torque constant, the same 27 mm bore and the same housing lengths and inertias. The 80-110 base build comes in at 2.06 kg against 1.5 kg, and at 10.4 A maximum continuous current with 9 A rated against 11.1 A and 9.6 A. The remaining frame differences are confirmed with the quotation.
Five: 51:1 at 121 N·m peak and up to 65 RPM, 81:1 at 169 N·m and 43 RPM, 101:1 at 194 N·m and 36 RPM, 121:1 at 207 N·m and 30 RPM, and 161:1 at 217 N·m and 22 RPM.
Gear backlash is 20 arcsec at 51:1 and 81:1 and 10 arcsec at 101:1, 121:1 and 161:1.
Mass and length are 2.06 kg at 85.5 ±0.5 mm for the base build, 2.05 kg at 85.5 ±0.5 mm for the -2E-EC, and 2.26 kg at 105.5 ±0.5 mm for the extended -B body.
The -2E-EC build, with CAN or EtherCAT and a 16/18-bit encoder option. The base and -B builds use CAN with a 16-bit encoder.
It is offered by quotation. Build, gear ratio, quantity and delivery are confirmed per project, and the price is set in the quotation.
Recently Viewed
You haven't viewed any products yet.
