- Wheels on Articulated Legs Powered wheels roll on smooth ground, and the legs step over obstacles up to 65 cm and climb 16 cm stairs.
- 100 TOPS on Board An NVIDIA Jetson Orin NX 16 GB module runs perception, mapping and learned control policies on the robot.
- Sensors Already Fitted A Mid-360 3D LiDAR, RealSense depth camera, GNSS with an RTK antenna and a 5G module come pre-installed.
- Open-Source Navigation Baseline RoamerX Open on GitHub provides demo-level localisation and navigation to study, extend or replace.
- Full Machine SDK Motion, video-stream and status interfaces are open for secondary development over Ethernet, USB 3.0, SBUS and RS485.
- Quiet in the Classroom Wheel drive keeps operating noise as low as 55 dB.
- Made to Take Knocks IP54 protection and a 360° protective body with soft gel on the head and tail suit student and research use.
Description
The Genisom L1-W EDU is the research and education edition of Genisom's wheel-legged L1-W quadruped, for teams that want a fast robot with the computer and sensors already fitted and the autonomy software left open. It adds an NVIDIA Jetson Orin NX 16 GB module with up to 100 TOPS, a Mid-360 3D LiDAR, a RealSense depth camera, a GNSS module with an RTK antenna and a 5G module to the L1-W platform.
Navigation starts from RoamerX Open, Genisom's open-source, demo-level localisation and navigation stack on GitHub. Teams can study it, build on it or replace it with their own SLAM, planning and control code, and Genisom's full machine SDK opens the motion, video-stream and status interfaces for secondary development. That is the difference from the L1-W EDU RoamerX Pro, which carries the same hardware with Genisom's ready-to-deploy RoamerX Pro navigation software.
Powered wheels on articulated legs roll efficiently on smooth floors and step and climb where they have to. Twelve joint modules deliver up to 48 N·m of peak torque, and Genisom gives the L1-W a sprint speed above 5.5 m/s, obstacles up to 65 cm, continuous climbing of 16 cm stairs and a 40° extreme climbing angle. Genisom describes it as the first production wheel-leg robot with AI reinforcement-learning motion control.
Wheel drive keeps operating noise as low as 55 dB, which suits labs and classrooms, and a 360° protective body with soft gel on the head and tail, IP54 protection and a 0 to 40 °C operating range help it take the knocks of student use. Weight, payload, runtime and range with the kit fitted, the supported ROS versions and 5G band support for your country are confirmed with your order.
Key Capabilities
- Wheels on Articulated Legs: Powered wheels roll on smooth ground, and the legs step over obstacles up to 65 cm and climb 16 cm stairs.
- 100 TOPS on Board: An NVIDIA Jetson Orin NX 16 GB module runs perception, mapping and learned control policies on the robot.
- Sensors Already Fitted: A Mid-360 3D LiDAR, RealSense depth camera, GNSS with an RTK antenna and a 5G module come pre-installed.
- Open-Source Navigation Baseline: RoamerX Open on GitHub provides demo-level localisation and navigation to study, extend or replace.
- Full Machine SDK: Motion, video-stream and status interfaces are open for secondary development over Ethernet, USB 3.0, SBUS and RS485.
- Quiet in the Classroom: Wheel drive keeps operating noise as low as 55 dB.
- Made to Take Knocks: IP54 protection and a 360° protective body with soft gel on the head and tail suit student and research use.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Official Product Videos
Features
Specs
| Brand | Genisom |
|---|---|
| Model | L1-W EDU |
| Product Type | Wheel-legged quadruped robot, research and education edition |
| Platform | Genisom L1-W |
| Joint Modules | 12, up to 48 N·m peak torque |
| Sprint Speed | Above 5.5 m/s |
| Maximum Obstacle Height | 65 cm |
| Continuous Stair Climbing | 16 cm |
| Extreme Climbing Angle | 40° |
| Motion Control | AI reinforcement-learning motion control |
| Ingress Protection | IP54 |
| Operating Temperature | 0 to 40 °C |
| Operating Noise | As low as 55 dB |
| Computing | NVIDIA Jetson Orin NX 16 GB, up to 100 TOPS |
| LiDAR | Mid-360 3D LiDAR |
| Depth Camera | RealSense |
| Positioning | GNSS module with RTK antenna |
| Communication | 5G module |
| Interfaces | Ethernet, power, SBUS + RS485, USB 3.0 (Orin NX), USB 3.0 (main controller) |
| SDK | Full machine SDK: motion, video-stream and status interfaces |
| Navigation Software | RoamerX Open (open source, GitHub): demo-level localisation and navigation |
| Weight | 24 kg |
| Dimensions (L × W × H) | 630 × 430 × 585 mm (standing) |
| Payload | Confirm at quote |
| Runtime and Range | Confirm at quote |
| Supported ROS Versions and SDK Languages | Confirm at quote |
| Spare Batteries and Charging Dock | Confirm at quote |
Industries
Frequently Asked Questions
The hardware is the same. The L1-W EDU comes with the open-source, demo-level RoamerX Open, for teams building and benchmarking their own stack; the RoamerX Pro edition adds Genisom's ready-to-deploy RoamerX Pro navigation software.
The standard L1-W has no EDU package. The EDU adds the Orin NX computer, LiDAR, depth camera, RTK GNSS, 5G module and RoamerX Open support.
Yes. The full machine SDK opens motion, video-stream and status interfaces, and the robot has Ethernet, USB 3.0, SBUS and RS485 interfaces.
It is rated IP54 against dust and water splashes and works from 0 to 40 °C. It is not made for submersion.
High-accuracy RTK positioning may need a base station or a correction service, and 5G band support and SIM requirements for your country are confirmed with your order.
The Genisom L1-W EDU Wheeled Quadruped Robot is priced at 292 200 Kč in your market. For volume or project orders, contact us for a business quote.
Recently Viewed
You haven't viewed any products yet.
