- Slim body The narrow profile reaches between parts, into trays and into fixtures where wider grippers collide.
- 15 to 50 N per jaw Gripping force is set in software, gentle on plastic parts and firm on metal ones.
- ±0.02 mm repeatability Parts land in the same spot cycle after cycle, which matters for assembly and fixture loading.
- 0.3 s cycles Opening and closing take 0.3 s each, for fast pick and place on short cycles.
- No compressed air The gripper runs on 24 V DC, so the cell needs no air supply, valves or tubing.
- Brake option A version with a brake holds the part if power is lost; the choice is made with the quotation.
Description
For small parts such as electronic components, sample tubes, plastic pieces and machined inserts, an electric gripper is often the right choice: it needs no compressed air, its force and position are set in software, and it reports whether it is holding a part. The PGEA-50-26 is a slim electric parallel gripper from DH Robotics, supplied by Dobot as a kit for its robot arms under part number 2100002349.
Dobot pairs the PGEA series with the Dobot MG400 Desktop Robotic Arm. On that arm, gripper and part together must stay within the MG400's 750 g maximum payload, so the 0.5 kg gripper leaves room for light parts only; on a larger Dobot cobot it handles workpieces up to the 1 kg DH Robotics recommends.
Each jaw grips with 15 to 50 N across a 26 mm stroke and repeats to ±0.02 mm, tighter than the ±0.03 mm of the PGC-50-35 and AG-95. The jaws open and close in 0.3 s each way, quicker than the PGC-50-35 and AG-95, which suits short pick and place cycles. A rack and pinion with crossed roller guide drives them, and the slim body reaches between parts, into trays and into fixtures where wider grippers would collide.
It runs on 24 V DC ±10% at up to 20 W, below 50 dB, with Modbus RTU over RS485 and digital I/O (two inputs, two outputs) as standard and TCP/IP, USB 2.0, CAN 2.0A, PROFINET and EtherCAT as options. The body is rated IP40, for clean, dry indoor areas, and works from 0 to 40 °C under 85% RH. The version with or without brake, which holds the part if power is lost, is chosen with the quotation.
Key Capabilities
- Slim body: The narrow profile reaches between parts, into trays and into fixtures where wider grippers collide.
- 15 to 50 N per jaw: Gripping force is set in software, gentle on plastic parts and firm on metal ones.
- ±0.02 mm repeatability: Parts land in the same spot cycle after cycle, which matters for assembly and fixture loading.
- 0.3 s cycles: Opening and closing take 0.3 s each, for fast pick and place on short cycles.
- No compressed air: The gripper runs on 24 V DC, so the cell needs no air supply, valves or tubing.
- Brake option: A version with a brake holds the part if power is lost; the choice is made with the quotation.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation. On-site installation is not included in the product price.
Features
Specs
| Brand | Dobot |
|---|---|
| Gripper Maker | DH Robotics |
| Model | PGEA-50-26 |
| Dobot Part Number | 2100002349 |
| Product Type | Slim electric parallel gripper |
| Gripping Force (per jaw) | 15 to 50 N, adjustable |
| Stroke | 26 mm |
| Recommended Workpiece Weight | 1 kg |
| Opening / Closing Time | 0.3 s / 0.3 s |
| Position Repeatability | ±0.02 mm |
| Drive | Rack and pinion with crossed roller guide |
| Weight | 0.5 kg (with or without brake) |
| Communication | Modbus RTU (RS485), digital I/O (2 inputs, 2 outputs); optional TCP/IP, USB 2.0, CAN 2.0A, PROFINET, EtherCAT |
| Nominal Voltage | 24 V DC ±10% |
| Maximum Power | 20 W |
| Noise | Below 50 dB |
| Ingress Protection | IP40 |
| Operating Environment | 0 to 40 °C, under 85% RH |
| Certifications | CE, FCC, RoHS |
| Brake | With or without brake, chosen at quote |
| Dimensions | Confirm at quote |
| Kit Contents and Robot Adapter | Confirm at quote |
Industries
Frequently Asked Questions
A slim electric parallel gripper made by DH Robotics, supplied by Dobot as a kit for its robot arms (part 2100002349).
15 to 50 N per jaw, adjustable in software, for workpieces up to 1 kg.
Yes, Dobot pairs the PGEA series with the MG400. Gripper and part together must stay within the MG400's 750 g maximum payload, and the gripper weighs 0.5 kg.
Through Modbus RTU over RS485 or digital I/O, on 24 V DC.
In clean, dry indoor areas. It is rated IP40 and works from 0 to 40 °C under 85% RH.
The Dobot DH PGEA-50-26 Slim Electric Gripper is priced at 16 750 Kč in your market. For volume or project orders, contact us for a business quote.
Recently Viewed
You haven't viewed any products yet.
