- 7 kg in an 800 mm envelope More payload than the CR5A for compact cells where the work sits close to the base.
- 24.5 kg arm Light enough for small stands and carts despite the higher payload.
- ±0.02 mm repeatability Placement stays precise with heavier tools at the flange.
- 2 m/s TCP speed The tool centre point moves at up to 2 m/s.
- Line-ready protocols TCP/IP, Modbus TCP, EtherNet/IP and PROFINET on two WAN ports, Modbus RTU over RS-485 and Wi-Fi.
- 150 W from single-phase mains The controller takes 100 to 240 V AC at 47 to 63 Hz.
Description
The CR7A puts more payload into a tighter envelope. It carries 7 kg over an 800 mm reach and weighs 24.5 kg, half a kilogram less than the 5 kg CR5A, which makes it the arm for compact cells where the gripper and part have outgrown 5 kg but the work still sits close to the base.
Typical jobs are screwdriving with a heavier driver, loading dense parts into a fixture, packing and small-machine tending. Repeatability is ±0.02 mm and the tool centre point moves at up to 2 m/s.
Connectivity matches the rest of the CRA range: two WAN ports for TCP/IP, Modbus TCP, EtherNet/IP and PROFINET, an RS-485 port for Modbus RTU, and built-in Wi-Fi. The controller runs on 100 to 240 V AC at 47 to 63 Hz and the arm draws 150 W.
It is rated IP54, works from 0 to 50 °C and is built from aluminium alloy and ABS. If the work needs more than 800 mm of reach at 5 kg or less, the CR5A covers 900 mm.
Key Capabilities
- 7 kg in an 800 mm envelope: More payload than the CR5A for compact cells where the work sits close to the base.
- 24.5 kg arm: Light enough for small stands and carts despite the higher payload.
- ±0.02 mm repeatability: Placement stays precise with heavier tools at the flange.
- 2 m/s TCP speed: The tool centre point moves at up to 2 m/s.
- Line-ready protocols: TCP/IP, Modbus TCP, EtherNet/IP and PROFINET on two WAN ports, Modbus RTU over RS-485 and Wi-Fi.
- 150 W from single-phase mains: The controller takes 100 to 240 V AC at 47 to 63 Hz.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.
Features
Specs
| Brand | Dobot |
|---|---|
| Model | CR7A (CRA series) |
| Product Type | Six-axis collaborative robot arm |
| Degrees of Freedom | 6 |
| Payload | 7 kg |
| Reach | 800 mm |
| Repeatability | ±0.02 mm |
| Maximum TCP Speed | 2 m/s |
| Weight | 24.5 kg |
| Input Power | 100 to 240 V AC, 47 to 63 Hz |
| Power Consumption | 150 W |
| Communication | 2× WAN for TCP/IP, Modbus TCP, EtherNet/IP and PROFINET; 1× RS-485 for Modbus RTU; Wi-Fi |
| Ingress Protection | IP54 |
| Operating Temperature | 0 to 50 °C |
| Materials | Aluminium alloy, ABS |
| Joint Ranges and Speeds | Confirm at quote |
| End Effector | Confirm at quote |
| Mounting Hardware | Confirm at quote |
Industries
Frequently Asked Questions
The CR7A carries 7 kg against 5 kg but reaches 800 mm instead of 900 mm, and weighs 24.5 kg against 25 kg. Choose it when the load is heavier and the work stays close to the base.
Repeatability is ±0.02 mm.
Yes. TCP/IP, Modbus TCP, EtherNet/IP and PROFINET run over two WAN ports, with Modbus RTU over RS-485.
Single-phase 100 to 240 V AC at 47 to 63 Hz; the arm draws 150 W.
The arm is rated IP54 and works from 0 to 50 °C.
The Dobot CR7A Collaborative Robot Arm is priced at 364 200 Kč in your market. For volume or project orders, contact us for a business quote.
Recently Viewed
You haven't viewed any products yet.
